GDPWJ500钢带抛丸机
(专利号201220717325.8)
一.概述:
钢带抛丸机是一种通过式全自动除锈设备。可用于碳钢带钢、不锈钢带钢、低合金带材进行高性能机械除锈、除鳞、表面清理,还可以和化学药剂相结合使用。通过除鳞清理后的表面光洁度质量优良。通过调节抛丸量,可持续保持很高的去锈除鳞效率,从而确保被处理带钢质量的均匀统一。
带钢经开卷人工送至夹送带钢抛丸机上,穿过抛丸清理室,至收卷。利用高效悬壁离心式抛丸器将弹丸高速抛射到被清理工件表面上,对工件进行冲击刮削,以清除工件表面的铁锈、氧化皮及其它污物,然后利用钢丝刷、吸气管将工件表面的浮尘吸干净,从而达到提高钢带的抗腐蚀能力,抗疲劳性能,延长其使用寿命,优化钢带的表面工艺状态。本机既可单机使用,亦可组线使用。
二.主要技术参数:
设 备 型 号 GDPWJ500
清理工件尺寸 宽度*厚度 200-500mm×2-4mm
抛 丸 器 型 号 GDPWJ5001
数 量 8个
抛丸量 8×90Kg/min
功 率 8×11KW
提 升 机 功 率 3KW
输送装置 功 率 2.2KW
分 离 器 分离量 43.2/h
钢带速度 25m/min
吹钢带表面丸粒风机 5.5KW
清刷机系统 4x2KW
除尘系统 处理风量 12000m3/h
功 率 15KW+7.5KW
丸 料 循 环 量 43.2T/hx2
丸料首次加入量 约1500Kgx2
主机外形尺寸(长×宽×高) 约4500×1000×5200mm,二台
总 功 率 129.2KW
点击下载查看:500钢带抛丸机参数1306发网
GDPWJ500 steel belt shot blasting machine
(Patent No. 201220717325.8)
One. Overview:
Steel belt shot blasting machine is a pass-through automatic rust removal equipment. Can be used for carbon steel strip, stainless steel strip, low alloy strip for high-performance mechanical rust removal, descaling, surface cleaning, and can be used in combination with chemical agents. The surface finish after descaling is of good quality. By adjusting the amount of shot blasting, the high efficiency of rust removal and descaling can be maintained continuously, thereby ensuring the uniform and uniform quality of the treated strip.
The strip is manually delivered to the pinch strip shot blasting machine through the unwinding, passes through the shot blasting cleaning room, and is rewinded. High-efficiency cantilever centrifugal shot blaster is used to project the projectile on the surface of the workpiece to be cleaned at high speed, and the workpiece is impact-scraped to remove rust, oxide scale and other dirt on the surface of the workpiece, and then use a wire brush and suction pipe to blast The floating dust on the surface is cleaned, so as to improve the corrosion resistance and fatigue resistance of the steel strip, extend its service life, and optimize the surface process state of the steel strip. This machine can be used alone or in groups.
two. The main technical parameters:
Equipment type GDPWJ500
Clean workpiece size width * thickness 200-500mm × 2-4mm
Shot blasting machine type GDPWJ5001
Number of 8
Shot blasting capacity 8 × 90Kg / min
Power 8 × 11KW
Lift power 3KW
Conveying device power 2.2KW
Separator separation capacity 43.2 / h
Speed of steel belt 25m / min
Blowing fan for steel belt surface pellet 5.5KW
Brush cleaning system 4x2KW
Dust removal system Air volume 12000m3 / h
Power 15KW + 7.5KW
Shot volume 43.2T / hx2
The first addition of pellets is about 1500Kgx2
Main unit dimensions (length × width × height) about 4500 × 1000 × 5200mm, two units
Total power 129.2KW
发送反馈
历史记录
Click to download and view: 500 steel belt shot blasting machine parameters |